AWS IoT Core
      Back to home
      1. Knowledge Hub
      2. Third-Party Network Servers
      3. AWS IoT Core

      Adding TEKTELIC Sensors to AWS IoT Core

      AWS IoT Core

      1. Follow the instructions found at the following link for setting up the necessary roles and policies for your AWS IoT Core: https://knowledgehub.tektelic.com/basic-station-interface-for-aws-iot-core-for-lorawan. If this has already been done, see below for instructions for adding your TEKTELIC sensors to the AWS IoT Core.
      2. From the AWS IoT Core home page select "LPWAN devices" and then select "Devices" from the drop down menu.
      3. Select "Add Wireless Device"
      4. Under "Wireless Device Specification" select "OTAA v1.0.x"
      5. Enter the DevEUI, AppKey and AppEUI provided with your TEKTELIC sensor in the fields where they are requested.
      6. Add a name and description for the Wireless device if desired.
      7. Under "Profiles" select the "Device Profile" and "Service Profile" that were created for your sensor in the documentation linked in Step #1 above.
      8. Under "Destination Name", select the Destination created for your sensor in the documentation linked in Step #1 above.
      9. After clicking "Next" enter the Location information for the device under "Position Information" if desired.
      10. Select "Add Device" Your sensor has now been added to the AWS IoT Core Network Server.